Application
Product Detail
1.Antenna : Extend receiving distance
2.Protective Housing : Protect components from damage during shipping and using
3.Indicator : Light when connected with power
4.Learning Button : Press learing button to set up mode
5.Blue Protection Terminal : High voltage protection
6.NO=Normal Open,NC=Normal Close,COM=Common port
7.+12 V : Positive 12V, -12 V : Negative 12V
Technical Data Of Receiver:
Power Voltage | DC 12 V |
Working Voltage | 1-250 V |
Size | 1.38*1.18 in(35*30 mm) |
Weight | 0.07 lb(30 g) |
Max current | 10A |
Quiescent Current | less than 5mA |
Amount of storage remote controls | 25pcs |
Working temperature | -30~+80 Celsius |
Mode | Momentary / Toggle/ Latched/Delay |
Feature | Has product manual in Russia & Spanish |
Feature2 | Can control Electromagnetic door |
Technical Data Of Transmitter:
Size | 1.38*1.18 in(35*30 mm) |
Weight | 0.07 lb(30 g) |
Battery | 1pcs CR2016(Include) |
Receiving Range | Up to 50 meters(theoretical distance) |
Button | 1/2/3/4 |
Feature | Has keychain |
IC Chip | 1527 learning code |
Material | PVC |
choose different options to place an order
Wiring Diagram
This receiver can work with lamps,bulbs,lights,etc.The receiver itself needs DC 12 V power.And there are two different wirings depends on whether there is an external power too.Here is a picture:
It can control an electronic Door too.Please look at this picture:
Operating mode and Set up
You can match the Transmitter with the Relay Receiver Module in 4 modes.
1. Press and hold one button, relay will turn on;
2. Release the button, this relay will turn off.
1. Press button “A”, relay will turn on;
2. Press button “A” again, this relay will turn off.
Latched mode:
1. Press button “A”, relay will turn on;
2. Press button “B”, this relay will turn off.
Delay Mode:
1. Press and hold on button “A”,relay will turn on;
2.Release the button,this relay will turn off after 5 seconds(or 10/15 seconds)
Delete the existing data about operating modes
Note:
1. When you receive our products, it may set in one remote mode randomly, that because each product was tested before it can be arranged to shipment. So, please delete the existing data to first use.
2. After deleted the data, all the remote controls cannot work any more.
Set up
Set up(Momentary)
1. Press the learning button(on the Receiver) once. Wait for 3 seconds;
2. Press one button on the remote control. Wait for 3 seconds. Succeed.
Set up(Toggle)
2. Press one button on the remote control. Wait for 3 seconds. Succeed.
Set up(Latched)
1. Press the learning button(on the Receiver) triple. Wait for 3 seconds;
2. Press button “A” on the remote control. Wait for 3 seconds.
3. Press button “B” on the remote control. Wait for 3 seconds. Succeed.
Set up(Delay)
1. Press the learning button(on the Receiver) 4 times(or 5/6 times). Wait for 3 seconds;
2. Press one button on the remote control. Wait for 3 seconds. Succeed.
*If you do not understand clearly. Please send us a message to let us know. We will do our best to service each of our customers. Enjoy your shopping!*
*We have hundreds of workers in our factory.We are always willing to have some ODM/OEM business with you.Please contact to us if you need this. *