Product description:
The product is a preamplifier. It is not audio amplifier. It needs to be connected to an active speaker and a rear amplifier. This product does not support the connection of phonograph
Note:
The product is a Bluetooth bile preamplifier. It has a slight beep due to the influence of the high-frequency signal of the Bluetooth turned on, which is a normal phenomenon and does not affect the normal use of the product
Product parameters:
Power supply: DC12V
Audio input: connected to MP3, computer CD, DVD, mobile phone, etc. Signal output
Audio output: connected to amplifier, active speaker and other signal input
With treble and bass adjustment
With treble and bass adjustment
Specifications: Bluetooth 5.0 QCC3003
With Bluetooth & AUX switch selection
Size (L*W*H): 137*120*35MM (without tube height)
Features:
1. Using original 6J1 tube
2. The main filter capacitor is imported from 1000UF/25V, and the coupling capacitor is imported with 1UF Philips capacitor.
3. The resistor uses a five-ring 1% metal resistor to ensure a good signal-to-noise ratio.
4. The PCB adopts 1.6mm thick double-sided sheet, 2.0 oz copper thickness, and the whole process of tin-spraying ensures the good passing performance of the current. First-class PCB quality.
5. The input and output are made of gold-plated RCA lotus seat, which is durable and beautiful!
6. The board layout is reasonable, beautiful, and the current is small.
Note:
1. This finished machine is a preamplifier, not a power amplifier, it should be used with a post-amplifier or an active speaker. It is not allowed to directly connect passive speakers, speakers and earphones to the power amplifier; if it is not used, the car will be burnt if the voltage is unstable.
2. The general audio line or power supply filtering is not good, resulting in a very high probability of noise at the bottom noise. It is recommended to use a good audio cable or power supply.
3. To ensure that there is no problem with your own audio source, the preamplifier itself has a preamplifier function. If the source itself has noise, then the preamplifier will only amplify its noise. Please use a good source test.
4. Check if the tube is plugged in with the base. Please insert the tube and the base. Be sure to insert the tube in case of power failure.
Packaging:
1 x 6J1 Tube Preamplifier
2 x tubes
Please confirm if your chiose includes power plug.